Expansion vessel servicing in London — pressure testing, pre-charge recharge, diaphragm failure diagnosis, leaking or waterlogged vessels repaired and heating, potable and unvented cylinder vessels replaced.
Expansion vessel servicing in London — pressure testing, pre-charge recharge, diaphragm failure diagnosis, leaking or waterlogged vessels repaired and heating, potable and unvented cylinder vessels replaced.
Related: Unvented hot water cylinder service · Boiler repair London
An expansion vessel absorbs the pressure rise as water heats. Once the pre-charge is lost the system pressure swings, the PRV discharges and the boiler or cylinder starts to fault. Servicing restores it to the manufacturer's figure.
Every visit starts with an expansion vessel inspection and test: system isolated and drained down at the vessel, Schrader valve checked for water, and the vessel tested for diaphragm integrity before anything is recharged.
We take an expansion vessel pressure check with a calibrated gauge on a depressurised system, compare it to the required pre-charge and record the reading, so you have evidence of the pressure test for your records.
Expansion vessel annual maintenance is the cheapest way to avoid a failure. We offer single visits and expansion vessel maintenance contracts covering multiple vessels across a building or portfolio in London.
Most vessels lose nitrogen or air slowly over years. A recharge takes under an hour and usually cures repeated pressure loss and PRV dripping without replacing anything.
We isolate and drain the vessel, recharge it through the Schrader valve with a hand pump or compressor, then refill and repressurise the system and re-check under heat. Expansion vessel repressurisation is included in every service visit.
Expansion vessel pre-charge pressure is set to the manufacturer's figure — commonly around 1.0 bar on a sealed heating system and 3.0 bar on an unvented cylinder. Where a system has been altered we make an expansion vessel pressure adjustment to suit the static head.
If the vessel will not hold its charge, the diaphragm has gone and recharging will only buy days. These are the faults we see most across London.
An expansion vessel losing pressure, or with no pressure at all at the Schrader valve, points to a perished diaphragm or a leaking valve core. We test both before quoting a repair or replacement.
Water escaping from the Schrader valve confirms a waterlogged expansion vessel and diaphragm failure — the vessel is full of water and has no air cushion left. It cannot be serviced and is replaced like for like.
An expansion vessel leaking at the shell, flexible hose or isolating valve is repaired on site where the vessel body is sound; a corroded shell or a leaking valve seat is replaced.
Where a vessel cannot be recharged we replace it with a correctly sized, WRAS-approved unit and set the pre-charge before commissioning.
Expansion vessel replacement in London covers heating and potable vessels from 2 to 80 litres, including central heating expansion vessel replacement and internal boiler vessels. Replacement cost depends on vessel size, type and access — we confirm it before starting.
Boiler expansion vessel servicing covers the internal vessel inside combi and system boilers. Where the internal vessel is beyond recharge and access is poor, an external expansion vessel installation on the heating return is often the better long-term fix.
Heating expansion vessel servicing and heating expansion vessel recharge keep sealed systems stable, stop the filling loop being used as a crutch and protect the boiler from repeated low-pressure lockouts.
Potable vessels on the cold feed to an unvented cylinder are a separate item from the heating vessel and are frequently missed on annual services.
Potable expansion vessel servicing uses WRAS-approved vessels suitable for drinking water. We carry out potable expansion vessel recharge and replacement alongside hot water expansion vessel servicing on the same visit.
Unvented cylinder expansion vessel recharge and replacement — including Megaflo expansion vessel recharge — stops hot taps dripping, expansion relief valves discharging and pressure spikes on the hot water side.
Large vessels in commercial plant rooms carry far more stored energy and need scheduled inspection rather than reactive repair.
Commercial expansion vessel servicing, commercial heating expansion vessel testing and commercial expansion vessel replacement are carried out to suit building hours, with isolation and recommissioning documented.
Plant room expansion vessel servicing and plant room expansion vessel replacement cover floor-standing and large expansion vessel servicing up to several hundred litres, including lifting, bracketing and pre-charge setting.
Expansion Vessel Servicing & Repair is the kind of work where the difference between a good plumber and a poor one shows up months, not minutes, after the invoice. A push-fit fitting bodged behind plasterboard, a soil-pipe joint that isn't properly solvent-welded, a compression olive over-tightened onto old lead-lined copper — none of these fail immediately, but every one of them turns into an insurance claim within a year. When you book expansion vessel servicing & repair with us anywhere in London, the engineer who attends is directly employed, DBS-checked, fully insured to £5 million public liability and — where the job touches gas — Gas Safe registered.
That employed-only model is why we can offer a written workmanship guarantee on every expansion vessel servicing job and honour it without argument. It also means the person who diagnoses your fault is the person who fixes it, so there is no "the surveyor said one thing, the engineer said another" moment on the day. Across London and the surrounding postcodes we run stocked long-wheelbase vans carrying compression fittings, push-fit spares, WRAS-approved brassware, common boiler PCBs, drain rods, high-pressure jetting kit and colour CCTV — enough to first-time-fix the majority of expansion vessel servicing & repair calls without a second visit.
We do not charge a separate call-out fee if work proceeds. You get a fixed price agreed before we start, an itemised invoice on completion, photographs of any concealed work and a copy of any pressure-test, tightness-test or CCTV video for your records. Landlords, managing agents and letting agents in London routinely use these packs directly with their insurers, buildings insurers and — where relevant — the housing tribunal.
The first call is answered by a UK-based coordinator, not an overseas call centre. They will confirm your postcode in London, ask a short set of triage questions (is water actively flowing? is the stopcock accessible? is there gas involved?) and either dispatch an engineer immediately for an emergency or book you in at a specific hour rather than a four-hour "window". You will receive an SMS with the engineer's name and live ETA.
On arrival the engineer isolates the affected supply, protects flooring and furniture, and diagnoses the fault. For expansion vessel servicing that usually means one of a small number of failure modes, and we will explain what has failed, why, and what the two or three sensible repair options are — rather than defaulting to the most expensive. Everything gets a fixed written price before a spanner is turned. If a part needs to come from a merchant, most Central London and Home Counties merchants are within a 30-minute round trip; for less common parts we quote a return visit rather than sit on the clock.
On completion we pressure-test the affected section (or drop-test the drain, or tightness-test the gas), take before-and-after photographs, clean down the work area and issue a written invoice with the workmanship guarantee period clearly stated. You do not pay a penny until you have signed off the job on site.
Every expansion vessel servicing & repair job we complete in London and the surrounding postcodes carries a written workmanship guarantee. Replacement parts carry the manufacturer's warranty, which for boiler components is typically 12 to 24 months and for brassware, valves and pumps 12 months as a minimum. Where the work involves Gas Safe notifiable installations we submit the Building Regulations notification to Gas Safe Register on your behalf and the certificate arrives at the property by post within ten working days.
Our public liability cover is £5 million and our employer's liability is £10 million — the certificates are on the van and we are happy to share them with any managing agent or insurer who asks. For commercial clients we can also provide method statements, RAMS, permit-to-work compliance and out-of-hours access arrangements as standard, at no extra cost, when the works are booked in advance.
We operate 24/7, 365 days a year across London. Overnight, weekend and bank holiday call-outs use the same employed engineers as our weekday service — you are never handed over to a subcontractor at midnight — and the out-of-hours labour rate is quoted before we set off, never applied retrospectively.
Call or book online for expansion vessel servicing & repair in London. We'll confirm scope and a fixed price.
A fully insured local plumber attends at the agreed time with a stocked van — most jobs are fixed on the first visit.
Work is completed to WRAS / Water Regs / manufacturer spec and you get a written invoice, photos and our workmanship guarantee on the day.
Once a year, ideally at the same time as the boiler or unvented cylinder service. An annual expansion vessel pressure check and recharge takes minutes and prevents the pressure loss and relief valve discharge that cause most call-outs.
It is set to the manufacturer's figure for the appliance — typically around 1.0 bar on a sealed central heating system and about 3.0 bar on an unvented hot water cylinder. The charge is measured with the system depressurised, otherwise the reading is meaningless.
Common signs are system pressure that climbs sharply when the heating runs then drops when it cools, a pressure relief valve that keeps discharging, and water coming out of the Schrader valve when it is depressed — that last one confirms a waterlogged vessel with a failed diaphragm.
No. Once the diaphragm has split the vessel is full of water and has no air cushion, so it cannot hold a charge. It is replaced with a correctly sized vessel and the pre-charge is set before the system is refilled.
Often yes. Where the internal boiler vessel is inaccessible or undersized, an external expansion vessel installation on the heating return restores correct expansion capacity and is usually quicker and cheaper than stripping the boiler.
Yes. We service, test and replace commercial and plant room vessels including large floor-standing units, and offer expansion vessel maintenance contracts covering multiple vessels across a site or portfolio.
Our engineers can handle any of the works below in the same visit across London.
Unvented and vented hot water cylinder repairs and replacements in London — G3 qualified for unvented work, all major brands including Megaflo, Telford and Heatrae Sadia.
Gas Safe registered boiler repair in London — diagnosed and fixed same day for all major brands: Worcester Bosch, Vaillant, Baxi, Ideal, Glow-worm and Viessmann.
Full central heating diagnosis and repair in London — cold radiators, kettling boilers, leaking valves, pump failures and pressure loss. We restore even heat across every room.
Loft cold water storage tank installation, replacement and repair in London — fully WRAS-compliant, insulated and fitted with byelaw 30 kit for safe drinking water.
Failed or seized stopcocks and isolation valves replaced in London — essential for shutting off your water supply during an emergency. Internal, external and under-sink valves.
Yes — while our engineer is at your London property for expansion vessel servicing & repair, they can usually carry out leak detection, drain clearing, tap or toilet repairs and boiler checks in the same visit, saving you a second call-out fee.
Yes. Every service listed below is delivered by our own employed engineers throughout London and the surrounding postcodes — no subcontractors, no agency cover.
Yes. Tell us what you need when you book and we'll send a single fixed written quote covering expansion vessel servicing & repair plus any additional plumbing or drainage works at your London property.
Gas Safe engineers on call 24/7 across Greater London and the M25. Pick your area for local response times, arrival windows and same-day availability.
London (all boroughs) · same-day cover · fixed hourly rates
Central London · same-day cover · fixed hourly rates
East London · same-day cover · fixed hourly rates
West London · same-day cover · fixed hourly rates
North London · same-day cover · fixed hourly rates
South London · same-day cover · fixed hourly rates
Our London engineers also cover these neighbouring areas on the same shift pattern.
87 London boroughs, towns and M25 areas covered 24/7. Jump straight to local response times and availability for expansion vessel servicing & repair in your area.
All the services below can be carried out on the same visit as your expansion vessel servicing & repair in London.
Round-the-clock call-outs for burst pipes, leaks and lost water.
LEAKThermal imaging & acoustic location of buried leaks.
DRAINHigh-pressure jetting and rodding for foul and surface drains.
BOILGas Safe repairs for all major boiler brands, same day.
CCTVColour CCTV surveys with insurer-ready written report.
TAPMixer cartridges, washers and thermostatic valve repairs.
On the same visit in London we can also handle leak detection, blocked drains, boiler repairs, CCTV drain surveys, tap and shower fixes — anything in the emergency plumbing and drainage scope.
Yes. Landlords and managing agents in London get a dedicated coordinator, consolidated monthly invoicing, photo-documented job reports and a 24/7 emergency line for tenants.
Yes. For leak detection, drain surveys and flood-related work we provide a written report with photos and (where applicable) CCTV video — accepted directly by household and commercial insurers.
Our local emergency plumbers are on call 24/7 across London. Fully insured, Gas Safe registered where required, with fast response times day and night.
24/7 emergency response • All London postcodes