TMV temperature testing
Outlet temperatures are measured at full flow and compared with the commissioning figures. Any drift is corrected by cleaning strainers and check valves or replacing the cartridge.
TMV servicing in Bromley — thermostatic mixing valve temperature and failsafe testing to TMV2 and TMV3 standards, cartridge and strainer cleaning, valve repair and replacement with certificates issued.
TMV servicing in Bromley — thermostatic mixing valve temperature and failsafe testing to TMV2 and TMV3 standards, cartridge and strainer cleaning, valve repair and replacement with certificates issued.
Thermostatic mixing valves protect users from scalding, and in healthcare, care homes, schools and HMOs they must be tested and recorded annually.
Outlet temperatures are measured at full flow and compared with the commissioning figures. Any drift is corrected by cleaning strainers and check valves or replacing the cartridge.
The cold supply is isolated and the valve must shut down within the permitted time. A valve that fails this test is repaired or replaced on the spot wherever stock allows.
Servicing covers strainer cleaning, check valve replacement, descaling of the cartridge and re-setting the blend temperature, then re-testing to confirm compliance.
Where a valve is scaled beyond recovery we replace with an approved TMV2 or TMV3 valve, commission it and issue the test record for your compliance file.
TMV Servicing & Replacement is the kind of work where the difference between a good plumber and a poor one shows up months, not minutes, after the invoice. A push-fit fitting bodged behind plasterboard, a soil-pipe joint that isn't properly solvent-welded, a compression olive over-tightened onto old lead-lined copper — none of these fail immediately, but every one of them turns into an insurance claim within a year. When you book tmv servicing & replacement with us anywhere in Bromley, the engineer who attends is directly employed, DBS-checked, fully insured to £5 million public liability and — where the job touches gas — Gas Safe registered.
That employed-only model is why we can offer a written workmanship guarantee on every TMV servicing job and honour it without argument. It also means the person who diagnoses your fault is the person who fixes it, so there is no "the surveyor said one thing, the engineer said another" moment on the day. Across Bromley and the surrounding postcodes we run stocked long-wheelbase vans carrying compression fittings, push-fit spares, WRAS-approved brassware, common boiler PCBs, drain rods, high-pressure jetting kit and colour CCTV — enough to first-time-fix the majority of tmv servicing & replacement calls without a second visit.
We do not charge a separate call-out fee if work proceeds. You get a fixed price agreed before we start, an itemised invoice on completion, photographs of any concealed work and a copy of any pressure-test, tightness-test or CCTV video for your records. Landlords, managing agents and letting agents in Bromley routinely use these packs directly with their insurers, buildings insurers and — where relevant — the housing tribunal.
The first call is answered by a UK-based coordinator, not an overseas call centre. They will confirm your postcode in Bromley, ask a short set of triage questions (is water actively flowing? is the stopcock accessible? is there gas involved?) and either dispatch an engineer immediately for an emergency or book you in at a specific hour rather than a four-hour "window". You will receive an SMS with the engineer's name and live ETA.
On arrival the engineer isolates the affected supply, protects flooring and furniture, and diagnoses the fault. For TMV servicing that usually means one of a small number of failure modes, and we will explain what has failed, why, and what the two or three sensible repair options are — rather than defaulting to the most expensive. Everything gets a fixed written price before a spanner is turned. If a part needs to come from a merchant, most Central London and Home Counties merchants are within a 30-minute round trip; for less common parts we quote a return visit rather than sit on the clock.
On completion we pressure-test the affected section (or drop-test the drain, or tightness-test the gas), take before-and-after photographs, clean down the work area and issue a written invoice with the workmanship guarantee period clearly stated. You do not pay a penny until you have signed off the job on site.
Every tmv servicing & replacement job we complete in Bromley and the surrounding postcodes carries a written workmanship guarantee. Replacement parts carry the manufacturer's warranty, which for boiler components is typically 12 to 24 months and for brassware, valves and pumps 12 months as a minimum. Where the work involves Gas Safe notifiable installations we submit the Building Regulations notification to Gas Safe Register on your behalf and the certificate arrives at the property by post within ten working days.
Our public liability cover is £5 million and our employer's liability is £10 million — the certificates are on the van and we are happy to share them with any managing agent or insurer who asks. For commercial clients we can also provide method statements, RAMS, permit-to-work compliance and out-of-hours access arrangements as standard, at no extra cost, when the works are booked in advance.
We operate 24/7, 365 days a year across Bromley. Overnight, weekend and bank holiday call-outs use the same employed engineers as our weekday service — you are never handed over to a subcontractor at midnight — and the out-of-hours labour rate is quoted before we set off, never applied retrospectively.
Call or book online for tmv servicing & replacement in Bromley. We'll confirm scope and a fixed price.
A fully insured local plumber attends at the agreed time with a stocked van — most jobs are fixed on the first visit.
Work is completed to WRAS / Water Regs / manufacturer spec and you get a written invoice, photos and our workmanship guarantee on the day.
Annually as a minimum, with an initial re-test six to twelve weeks after installation. Healthcare settings often require six-monthly testing.
TMV2 valves are approved for domestic and commercial use; TMV3 valves meet the tighter NHS specification used in healthcare and high-risk settings. We service and certify both.
Our engineers can handle any of the works below in the same visit across Bromley.
Legionella risk assessment in Bromley for landlords and commercial premises — legionella testing, water sampling, temperature monitoring, dead leg removal, system flushing and TMV servicing for full compliance.
Commercial plumbing in Bromley for restaurants, offices, hotels, schools and retail — out-of-hours attendance, fixed-price contracts and direct insurer billing on flood-related call-outs.
Dripping taps, weak showers and faulty mixer valves repaired in Bromley — most jobs fixed without replacing the unit. Ceramic discs, cartridges, washers and thermostatic valves.
Urinal repair in Bromley — blocked urinals cleared, flush valves and automatic flush controls repaired, urinal installation, commercial toilet and concealed cistern repair and sensor tap repair for busy washrooms.
Yes — while our engineer is at your Bromley property for tmv servicing & replacement, they can usually carry out leak detection, drain clearing, tap or toilet repairs and boiler checks in the same visit, saving you a second call-out fee.
Yes. Every service listed below is delivered by our own employed engineers throughout Bromley and the surrounding postcodes — no subcontractors, no agency cover.
Yes. Tell us what you need when you book and we'll send a single fixed written quote covering tmv servicing & replacement plus any additional plumbing or drainage works at your Bromley property.
Gas Safe engineers on call 24/7 across Greater London and the M25. Pick your area for local response times, arrival windows and same-day availability.
London (all boroughs) · same-day cover · fixed hourly rates
Central London · same-day cover · fixed hourly rates
East London · same-day cover · fixed hourly rates
West London · same-day cover · fixed hourly rates
North London · same-day cover · fixed hourly rates
South London · same-day cover · fixed hourly rates
Our Bromley engineers also cover these neighbouring areas on the same shift pattern.
87 London boroughs, towns and M25 areas covered 24/7. Jump straight to local response times and availability for tmv servicing & replacement in your area.
All the services below can be carried out on the same visit as your tmv servicing & replacement in Bromley.
Round-the-clock call-outs for burst pipes, leaks and lost water.
LEAKThermal imaging & acoustic location of buried leaks.
DRAINHigh-pressure jetting and rodding for foul and surface drains.
BOILGas Safe repairs for all major boiler brands, same day.
CCTVColour CCTV surveys with insurer-ready written report.
TAPMixer cartridges, washers and thermostatic valve repairs.
On the same visit in Bromley we can also handle leak detection, blocked drains, boiler repairs, CCTV drain surveys, tap and shower fixes — anything in the emergency plumbing and drainage scope.
Yes. Landlords and managing agents in Bromley get a dedicated coordinator, consolidated monthly invoicing, photo-documented job reports and a 24/7 emergency line for tenants.
Yes. For leak detection, drain surveys and flood-related work we provide a written report with photos and (where applicable) CCTV video — accepted directly by household and commercial insurers.
Our local emergency plumbers are on call 24/7 across London. Fully insured, Gas Safe registered where required, with fast response times day and night.
24/7 emergency response • All London postcodes